Oil Change Light Reset Honda Fit 2016

The Oil Change Light Reset Honda Fit 2016 will need to be performed after every oil change. If it is not reset the system will be unable to properly track when your next oil change is due.

Below is the procedure for the 2016 Honda Fit. Follow the steps below to reset the oil life monitor after each oil change.

Oil Change Light Reset Honda Fit 2016 Procedure

1. Turn the ignition switch to ON (II) with the engine off.
2. Press SELECT/RESET knob repeatedly until the engine oil life indicator is displayed.
3. Press the SELECT/RESET knob for 10 seconds, until the Engine oil life indicator and the Maintenance item codes start to blink.
4. Release the button.
5. Press the SELECT/RESET knob again for 5 seconds.
6. The maintenance items codes will disappear and the engine oil life indicator will reset to 100%.
7. If the engine oil life indicator does not reset, repeat the steps.

Not Working?

If the oil change light reset procedure is not working to reset your oil life monitor, make sure you are following each of the steps exactly and in the order displayed in the procedure above. If this is not the oil life monitor reset procedure for your vehicle, restart your oil light reset procedure search HERE

Oil Life Monitor Reset Procedure Frequently Asked Questions

If you are still having trouble with visit the Oil Life Monitor Reset Procedure Frequently Asked Questions (FAQ) page for more information.

Notice

Due to the wide range of vehicles makes and models, this is general information and should not be taken as specific to any vehicle. Please consult the vehicle manufacturer for the correct specifications and repair procedures for your vehicle. This information is meant to be used as a guideline only.