Oil Change Light Reset Mercedes-Benz C300 2009
The Oil Change Light Reset Mercedes-Benz C300 2009 will need to be performed after every oil change. If it is not reset the system will be unable to properly track when your next oil change is due.
Below is the Oil Change Light Reset procedure for the Mercedes-Benz C300 2009 . Follow the steps below to reset the oil life monitor after each oil change.
Oil Change Light Reset Mercedes-Benz C300 2009 Procedure
With 12 Button Steering Wheel
- Turn the ignition to “POSITION 1”.
- Press the left button on left steering wheel controls repeatedly until kilometer reading is displayed.
- Press the system selection button repeatedly until “TRIP” is displayed.
- Press and hold the accept phone call button and within 1 second press and hold “OK” button for 5 seconds.
- “VEHICLE DATA, DYNAMOMETER TEST, AND ASSYST PLUS” will be displayed.
- Press the scroll forward button to highlight “FULL SERVICE” and then press “OK” button.
- Press scroll forward button to highlight “CONFIRM SERVICE” and then press “OK” button.
- Select specification of oil used using scroll forward button and press “OK” button.
- Press scroll forward button until “YES” is highlighted and press “OK” button.
- “FULL SERVICE CARRIED OUT” will be displayed.
- Press “OK” and “BACK” button repeatedly until menus are exited.
- Turn the ignition off.
With 4 Button Steering Wheel
- Turn the ignition to “POSITION 1”.
- Press the system selection button repeatedly until the kilometer reading is displayed.
- Press and hold the “R” button and within 1 second, press and hold the “+” button.
- Continue to hold for 5 seconds and the voltage indicator will be displayed.
- Press the system selection button and “ASSYST PLUS” will be displayed.
- Press the “R” button and “SERVICE DATA” will be displayed.
- Press the system selection button again and “FULL SERVICE” will be displayed. Press the “R” button and current services are displayed.
- Press the system selection button until “CONFIRM SERVICE” is displayed.
- Press the “R” button and “SERVICE COMPLETED?” is displayed.
- Select the oil specification used and confirm. Press the “+” button and “NO TAKE-BACK” will be displayed.
- Press the “+” button again and “FULL SERVICE CARRIED OUT” will be displayed.
- Press the system selection button repeatedly to exit the menu.
- Turn the ignition off.
Oil Viscosity and Capacity
The 3 liter engine holds approximately 8.5 quarts (8 liters) of 5W-40 oil when the engine oil and filter are changed.
Not Working?
If the oil change light reset procedure is not working to reset your oil life monitor, make sure you are following each of the steps exactly and in the order displayed in the Oil Change Light Reset Mercedes-Benz C300 2009 procedure above. If this is not the oil life monitor reset procedure for your vehicle, restart your oil light reset procedure search HERE
Oil Life Monitor Reset Procedure Frequently Asked Questions
If you are still having trouble with visit the Oil Life Monitor Reset Procedure Frequently Asked Questions (FAQ) page for more information.
Notice
Due to the wide range of vehicles makes and models, this is general information and should not be taken as specific to any vehicle. Please consult the vehicle manufacturer for the correct specifications and repair procedures for your vehicle. This information is meant to be used as a guideline only.